PCB Desktop pcb router,Cutting performancen 500mm/s,high speed spindle,650*550*615mm

Feafure:

1. Bench type single table cutting machine, with a speed of up to 100 mm / s and a positioning speed
of 500 mm / s.
2. High quality shaft system enables the system to accelerate and decelerate quickly, reduce the
synchronization time, improve productivity, and maintain high precision.
3. Use high-quality hardware to ensure high rigidity and high performance.
4. All guide screws are covered to prevent dust and dirt from entering, so as to improve the service life
and performance of the shaft.
5. Avoid tin cracking and parts damage caused by artificial folding.
6. Avoid the use of punching or folding, resulting in mechanical stress problems.
7. It is suitable for cutting arc and line of finished plate.
Technical Parameters:

1. Drive system motor:stepping motor
2. Spindle:high speed spindle
3. Cutting performance:500mm/s
4. Repeated accuracy of driving system:±0.02mm
5. Cutting speed:max. 100mm / s depends on circuit board material and cutting quality
6. Resolution:±0.01mm
7. Configuration:X, y, Z three axes, stroke: 300 * 300 * 100mm, stroke can also be
customized.
8. Repeated cutting accuracy:< 0.05mm, for the contour of straight line and curve
9. PCB positioning:special or standard fixture
10. Loading and unloading mode:manual mode
11. Thickness of circuit board:0.4mm-4mm
12. Safety setting:emergency stop switch of the whole machine, emergency stop switch
of the main shaft,overheat of the main shaft motor and overload detection of the servo
motor
13. Spindle motor:
Power: 0.3kw
Maximum speed:60000rpm
Cooling mode:air cooling
14. Machine size:650*550*615mm
15. Weight:73KG
16. Programming mode:keypad input teaching
17. Data storage capacity:100-200 groups of files
18. Control mode:microcomputer control, online teaching programming, CAD file import
19. Transmission mechanism:guide rail + screw rod (Taiwan)